This article contains exact ways of using the GERBERPanelizer which worked for me and generating combined GERBER for fabrication when your project is in KiCad. Please feel free to reach out or comment if you want more details for particular steps or see any error or have better ways to do it, please reach at vidit@kamui.tech In this example we have 2 Boards of 2 Layer Board. We will generate the GERBER, Combine them, export and prep the exported GERBER for fab Generate Files GERBER files from all boards Generate GERBERs with the following settings Generate Drill Files with the following settings Make sure all the files are in one folder as shown below Download and Open GERBER Panelizer. Can be found here https://github.com/ThisIsNotRocketScience/GerberTools/releases Merge using GERBERPanelizer Start New file Select as shown in photo and add the folder which has generated files You might not see anything added, do this to make it appear. See Note #1 to avoid this Add the next board...
Yes this article is actually about how to figure out connecting a stepper motor to your stepper motor driver. This article is needed because there is no actual standard set up (or I can't find) for the naming of pins in stepper motor and the naming are extremely frustrating and confusing, they are so confusing because 1A and A1 can totally different pins! In this post I attempt to connect all the random names flying around out there and create a clear guide using which you (and future me) can connect stepper motors no matter that naming (or pain) world throws at us. Actual attempt is to tell the naming, and also how to figure out connection by knowing the basics of stepper motor. If you know and understand the basic you don't really need the convention Now since I am done with my ranting/monologue following is the information which you care about We have two player in our stepper motor setup Stepper motor Motor drive Stepper Motor Basic Idea behind stepper motor is to p...