Skip to main content

How to Panelize GERBER of KiCAD Project using Open Source tool

This article contains exact ways of using the GERBERPanelizer which worked for me and generating combined GERBER for fabrication when your project is in KiCad. Please feel free to reach out or comment if you want more details for particular steps or see any error or have better ways to do it, please reach at vidit@kamui.tech

In this example we have 2 Boards of 2 Layer Board. We will generate the GERBER, Combine them, export and prep the exported GERBER for fab

Generate Files GERBER files from all boards

Generate GERBERs with the following settings


Generate Drill Files with the following settings

Make sure all the files are in one folder as shown below

Download and Open GERBER Panelizer. Can be found here https://github.com/ThisIsNotRocketScience/GerberTools/releases

Merge using GERBERPanelizer

Start New file


Select as shown in photo and add the folder which has generated files

You might not see anything added, do this to make it appear. See Note #1 to avoid this

Add the next board like this

Do this again to make it appear

To rotate, click on the board you want to rotate and click the option marked with yellow

It might disappear from the screen again. See Note #1 to avoid this

This time don't do Board Placement→ Autopack: Naive. Instead do the following

It will appear like this

Drag the board and bring it to desired location

Now add breaktabs like this

Make sure it doesn't look like this, if it does, that means either adjacent PCB are too far or too close 

Adjust distance between boards to make break tabs looks like this

Add enough breaktabs to make sure both boards turn green. This makes sure there is enough support for boards

Click on the following option to adjust size of panel

It looks like this

Height and width can be adjusted like this and also other things. But make sure the red marked options are as shown in photo

This can be done after adjusting panel size to make it look better on eyes

Exporting merged GERBER

Make sure to save the project. This evil genius software will not let you know that file need to saved when you closing the software.


Now make sure you have a empty Output folder where we will export merged GERBERs

Now to export merged GERBER do the following


Select the empty Output Folder

A process will run and you will have BitMap files of top layer and bottom layer pop up after the file export is generated

Inspect and Prep for Fab

Now open the GERBER files in a GERBER viewer available with KiCad and make sure the generated files are alright and then you are ready to place order with your favorite PCB Fabricator.

In some cases you might wanna delete the file with extension gm1 because it has individual PCB Outline and change the extension of file with GKO extension to GML, this file has combined cutting line for the final board and we are changing extension because some Fab houses websites do not recognize GKO but recognize GML


Note:

  1. Disappearance issue during placing and rotation happens because the origin of the GERBER might far away from the board. refer to this link while generating GERBER is the KiCad to avoid it https://hackaday.io/project/19202-small-pcbs-for-panelizing-tutorial/log/61023-gerber-export-tutorial-kicad-with-important-notes
  2. These steps can be followed for any EDA Tool, just to make sure equivalent options are selected during GERBER generation

Comments

  1. If you go to an internet on line casino expecting to spend a few of} hours playing in} your favourite games and possibly make 1xbet korea some money, ought to have} nice time|a good time}. If you expect a Monte Carlo Casino expertise, you may end up dissatisfied. If you’re a fan of video poker games, Red Dog Casino is one of the|is amongst the|is doubtless one of the} best online gambling sites we can to} recommend.

    ReplyDelete

Post a Comment

Popular posts from this blog

Looking for software engineer to join the Mumbai team

About Kamui Tech A team is all about it’s members and their values. Kamui Tech is made of passionate people who love to make creative, ambitious and, great technologies. Everyone on the team here has an interest in art and engineering. Kamui Tech is a software and electronic hardware consultancy startup. We are in phase of figuring out product market fit, trying out different products in rising markets. Once we have a fit, we will shift from consultancy to product base. We are experimenting in renewable, ev, satellites and ground station, fintech and, ed-tech. Till we figure out product, we do consultancy business to keep making money. We have unique unfair advantage as combination of soft and hard wares are in fabric of company's thought process. Currently we provide end-to-end solutions to real life problems by working with startups. WeWork Office. Our Mumbai team work out of cool co-working place About You A passionate individual who would take up respon

How to connect stepper motor

Yes this article is actually about how to figure out connecting a stepper motor to your stepper motor driver. This article is needed because there is no actual standard set up (or I can't find) for the naming of pins in stepper motor and the naming are extremely frustrating and confusing, they are so confusing because 1A and A1 can totally different pins! In this post I attempt to connect all the random names flying around out there and create a clear guide using which you (and future me) can connect stepper motors no matter that naming (or pain) world throws at us. Actual attempt is to tell the naming, and also how to figure out connection by knowing the basics of stepper motor. If you know and understand the basic you don't really need the convention Now since I am done with my ranting/monologue following is the information which you care about We have two player in our stepper motor setup Stepper motor Motor drive Stepper Motor Basic Idea behind stepper motor is to p